Rod Seals
Application Profile Description Min temp Max temp Max speed Max pressure Material
S1012-T S1012-T

S1012-T

 S1012-T
S1012-T		 Hydraulic, single acting
chevron sealing set, machined surface design for heavy industry hydraulics.
-30 °C 100°C 0.5m/s 500 bar
S10-A
Ecotal/
Ecomid		 S11-T
Ecotal/
Ecomid		 S12-T
Ecopur
H-Ecopur
T-Ecopur
S-Ecopur
G-Ecopur
Ecoflon2 Ecoflon2 Ecorub1
Ecorub2
Ecorub3
EcorubH
-20 °C 100°C 0.5 m/s 500 bar
-40 °C 100°C 0.5 m/s 500 bar
-20 °C 100°C 0.7 m/s 500 bar
-30 °C 100°C 0.5 m/s 500 bar
-30 °C 100°C 0.5 m/s 250 bar
-20 °C 200 °C 0.5 m/s 250 bar
-50 °C -150 °C 0.5 m/s 250 bar
-25 °C -150 °C 0.5 m/s 250 bar
                 
Application Profile Description Min temp Max temp Max speed Max pressure Material
S1012-T S1012-T

S1012-T

 S1315-TS1315-T
 Hydraulic, single acting
chevron sealing set, design with flexible sealing lips, good sealing ability in higher pressure range. for heavy industry hydraulics, water-hydraulic systems.
-30 °C 100°C 0.5m/s 500 bar S13-T
Ecotal/
Ecomid		 S14-T
Ecotal/
Ecomid		 S15-T
Ecopur
H-Ecopur
T-Ecopur
S-Ecopur
G-Ecopur
-20 °C 100°C 0.5 m/s 500 bar
-40 °C 100°C 0.5 m/s 500 bar
-20 °C 100°C 0.7 m/s 500 bar
-30 °C 100°C 0.5 m/s 500 bar
                 
Application Profile Description Min temp Max temp Max speed Max pressure Material
S1012-M S1012-M
S1012-M S16-A		 S16-A
S16-A		 Hydraulic/pneumatic, single acting
simple hat seal, usually fixed in housing with clamp flange. mainly used for replacement in old hydraulic and pneumatic cylinders or for secondary applications.
-30 °C 110 °C 0,5 m/s 160 bar ECOPUR  
-20 °C 110 °C 0,5 m/s 160 bar H-ECOPUR  
-20 °C 110 °C 0,7 m/s 160 bar S-ECOPUR  
-50 °C 110 °C 0,5 m/s 160 bar T-ECOPUR  
-30 °C 110 °C 0,5 m/s 160 bar G-ECOPUR  
-30 °C 100 °C 0,5 m/s 160 bar ECORUBBER 1  
-25 °C 150 °C 0,5 m/s 160 bar ECORUBBER-H  
-20 °C 200 °C 0,5 m/s 160 bar ECORUBBER 2  
-50 °C 150 °C 0,5 m/s 160 bar ECORUBBER 3  
                 
Application Profile Description Min temp Max temp Max speed Max pressure Material
S1012-M S1012-M
S1012-M S16-A		 S16-B
S16-B		 Hydraulic/pneumatic, single acting
simple hut seal, usually fixed in housing with clamp flange. mainly used for replacement in old hydraulic and pneumatic cylinders or for secondary applications.
-30 °C 110 °C 0,5 m/s 160 bar ECOPUR  
-20 °C 110 °C 0,5 m/s 160 bar H-ECOPUR  
-20 °C 110 °C 0,7 m/s 160 bar S-ECOPUR  
-50 °C 110 °C 0,5 m/s 160 bar T-ECOPUR  
-30 °C 110 °C 0,5 m/s 160 bar G-ECOPUR  
-30 °C 100 °C 0,5 m/s 160 bar ECORUBBER 1  
-25 °C 150 °C 0,5 m/s 160 bar ECORUBBER-H  
-20 °C 200 °C 0,5 m/s 160 bar ECORUBBER 2  
-50 °C 150 °C 0,5 m/s 160 bar ECORUBBER 3  
                Go Top
Application Profile Description Min temp Max temp Max speed Max pressure Material
S1012-M S1012-M
S1012-M S16-A		 S17-P
S17-P		 Hydraulic, single acting
asymmetric rod seal with additional sealing - respectively stabilizing lip. interference fit on outside diameter maintains stable fit in the housing. design mainly used for telescopic cylinders, mobile hydraulic or for special housing dimension.
-30 °C 110 °C 0,5 m/s 400bar ECOPUR  
-20 °C 110 °C 0,5 m/s 400bar H-ECOPUR  
-20 °C 110 °C 0,7 m/s 400bar S-ECOPUR  
-50 °C 110 °C 0,5 m/s 400bar T-ECOPUR  
-30 °C 110 °C 0,5 m/s 400bar G-ECOPUR  
                 
Application Profile Description Min temp Max temp Max speed Max pressure Material
S1012-M S1012-M
S1012-M S16-A		 S17-R
S17-R		 Hydraulic, single acting
as profile S17-P, but more adaption possibilities to diverse temperatures and media by selection of suitable seal material.
-30 °C 100 °C 0,5 m/s 160 bar ECORUBBER 1  
-25 °C 150 °C 0,5 m/s 160 bar ECORUBBER-H  
-20 °C 200 °C 0,5 m/s 160 bar ECORUBBER 2  
-50 °C 150 °C 0,5 m/s 160 bar ECORUBBER 3  
                 
Application Profile Description Min temp Max temp Max speed Max pressure Material
S1012-M S1012-M
S1012-M S16-A		 S18-P
S18-P		 Hydraulic, single acting
asymmetric rod seal as S17-P, but due to design with active backring suitable for larger extrusion gaps or higher pressure.
        Seal Part Back up ring
-30 °C 100 °C 0,5 m/s 600 bar ECOPUR ECOMID
-20 °C 100 °C 0,5 m/s 600 bar H-ECOPUR ECOTAL
-20 °C 100 °C 0,7 m/s 600 bar S-ECOPUR ECOMID
-40 °C 100 °C 0,5 m/s 600 bar T-ECOPUR ECOMID
-30 °C 100 °C 0,5 m/s 600 bar G-ECOPUR ECOTAL
                 
Application Profile Description Min temp Max temp Max speed Max pressure Material
S1012-M S1012-M
S1012-M S16-A		 S18-R
S18-R		 Hydraulic, single acting
asymmetric rod seal with additional sealing - respectively stabilizing lip and back ring. good adaption possibilities to diverse temperatures and medias by selection of suitable seal material, due to design with active back ring suitable for larger extrusion gaps or higher pressure.
        Seal Part Back up ring
-30 °C 100 °C 0,5 m/s 250 bar ECORUBBER1 ECOTAL
-30 °C 100 °C 0,5 m/s 250 bar ECORUBBER 1 ECOMID
-20 °C 200 °C 0,5 m/s 250 bar ECORUBBER 2 ECOFLON 2
-50 °C 100 °C 0,5 m/s 250 bar ECORUBBER 3 ECOTAL
-40 °C 100 °C 0,5 m/s 250 bar ECORUBBER 3 ECOMID
-50 °C 150 °C 0,5 m/s 250 bar ECORUBBER 3 ECOFLON 2
-25 °C 100 °C 0,5 m/s 250 bar ECORUBBER-H ECOTAL
-25 °C 100 °C 0,5 m/s 250 bar ECORUBBER-H ECOMID
-25 °C 150 °C 0,5 m/s 250 bar ECORUBBER-H ECOFLON 2
                 
Application Profile Description Min temp Max temp Max speed Max pressure Material
S1012-M S1012-M
S1012-M S16-A		 S19-F
S19-F		 PTFE rod seal, single acting
finger spring activated, asymmetrical PTFE rod seal, low friction and good dry running properties, excellent chemical and thermal resistance, mainly used in chemical, pharma and food industry.
        Seal part Spring
-200 °C 260 °C 15 m/s 100 bar ECOFLON1 1.4310

-200 °C 260 °C 15 m/s 160 bar ECOFLON 2 1.4310
-200 °C 260 °C 15 m/s 160 bar ECOFLON 3 1.4310
-200 °C 80 °C 15 m/s 200 bar ECOPE 1.4310
                Go Top
Application Profile Description Min temp Max temp Max speed Max pressure Material
S1012-M S1012-M
S1012-M S16-A		 S20-R
S20-R		 Hydraulic, double acting
space saving, compact rod seal, suitable for standard O-ring housings. advantage compared to O-ring: integrated active backrings for high pressure, design with interference fit on outside diameter maintains non-twisting in dynamic applications.
       

Seal part

Back up ring

-30 °C 100 °C 0,5 m/s 700 bar ECORUBBER1 Ecotal/ECOMID
-20 °C 200 °C 0,5 m/s 700 bar ECORUBBER 2 ECOFLON 2
-20 °C 100 °C 0,5 m/s 700 bar ECORUBBER-H ECOTAL
-25 °C 150 °C 0,5 m/s 700 bar ECORUBBER-H ECOPAEK
                 
Application Profile Description Min temp Max temp Max speed Max pressure Material
S1012-M S1012-M
S1012-M S16-A		 S21-P
S21-P		 Hydraulic, single acting
O-ring activated symmetric rod seal with sharp-edged sealing lips, good sealing effect for high viscosity fluids, not recommended for new designs (profile S03-P prefered)
        Seal part O ring
-30 °C 100 °C 0,5 m/s 400 bar ECOPUR NBR70
-20 °C 100 °C 0,5 m/s 400 bar H-ECOPUR NBR70
-30 °C 100 °C 0,5 m/s 400 bar S-ECOPUR NBR70
-20 °C 100 °C 0,7 m/s 400 bar T-ECOPUR NBR70
-30 °C 100 °C 0,5 m/s 400 bar G-ECOPUR NBR70
                 
Application Profile Description Min temp Max temp Max speed Max pressure Material
S1012-M S1012-M
S1012-M S16-A		 S22-P
S22-P		 Hydraulic, single acting
symmetric rod seal with support ring for simple applications to serve repair purpose, not recommended for new designs (profile S01-P prefered).
        Seal part Support ring
-30 °C 100 °C 0,5 m/s 400 bar ECOPUR

Ecotal /
ECOMID
-20 °C 100 °C 0,5 m/s 400 bar H-ECOPUR  
-20 °C 100 °C 0,7 m/s 400 bar S-ECOPUR  
-40 °C 100 °C 0,5 m/s 400 bar T-ECOPUR  
-30 °C 100 °C 0,5 m/s 400 bar G-ECOPUR  
                 
Application Profile Description Min temp Max temp Max speed Max pressure Material
S1012-M S1012-M
S1012-M S16-A		 S22-R
S22-R		 Hydraulic, single acting
symmetric rod seal as S22-P, but more adaption possibilities to diverse temperatures and media by selection of suitable seal material.
        Seal part Support ring
-30 °C 100 °C 0,5 m/s 160 bar ECORUBBER1 ECOTAL
-30 °C 100 °C 0,5 m/s 160 bar ECORUBBER 1 ECOMID
-20 °C 200 °C 0,5 m/s 160 bar ECORUBBER 2 ECOFLON 2
-50 °C 100 °C 0,5 m/s 160 bar ECORUBBER 3 ECOTAL
-40 °C 100 °C 0,5 m/s 160 bar ECORUBBER 3 ECOMID
-50 °C 150 °C 0,5 m/s 160 bar ECORUBBER 3 ECOFLON 2
-25 °C 100 °C 0,5 m/s 160 bar ECORUBBER-H ECOTAL
-25 °C 100 °C 0,5 m/s 160 bar ECORUBBER-H ECOMID
-25 °C 150 °C 0,5 m/s 160 bar ECORUBBER-H ECOFLON 2
                 
Application Profile Description Min temp Max temp Max speed Max pressure Material
S1012-M S1012-M S24-P
S24-P		 Hydraulic, single acting
O-ring activated rod seal with additional stabilizing lips and integrated active back ring for larger extrusion gaps, mainly used in mining industry.
        Seal O ring
-30 °C 100 °C 0,5 m/s 700 bar ECOPUR NBR(70 Sh.A)
-20 °C 100 °C 0,5 m/s 700 bar H-ECOPUR Back ring
-20 °C 100 °C 0,7 m/s 700 bar S-ECOPUR Ecotal/Ecomid
-30 °C 100 °C 0,5 m/s 700 bar T-ECOPUR  
-30 °C 100 °C 0,5 m/s 700 bar G-ECOPUR  
                Go Top
Application Profile Description Min temp Max temp Max speed Max pressure Material
S1012-M
S1012-M S16-A		 S2527-F
S2527-F		 PTFE chevron sealing set, single acting
optimized for low pressure, unequal angled chevron design results in good contact pressure even in low pressure range. external spring pretension necessary. mainly used in chemical, pharma and food industry.
-200 °C 260 °C 1,5 m/s 100 bar S25-F
Ecoflon2		 S26-F Ecoflon1 S27-F
Ecoflon2
                 
Application Profile Description Min temp Max temp Max speed Max pressure Material
S1012-M S1012-M S16-A S2931-F
S2931-F		 PTFE chevron sealing set, single acting
optimized for higher pressure, equal angled chevron design suitable for high pressure range. external spring pretension necessary. mainly used in chemical, pharma and food industry.
-200 °C 260 °C 1,5 m/s 315 bar S29-F
Ecoflon2		 S30-F
Ecoflon1		 S31-F
Ecoflon2
                 
Application Profile Description Min temp Max temp Max speed Max pressure Material
S1012-M S1012-M S32-P
S32-P		 Hydraulic, single acting
chevron sealing set, design with extremely flexible sealing lips for difficult operating conditions (bad guiding, large tolerance range). available as total chevron sealing set as well as intermediate chevrons only (in case of metal mal and female adapters).
        Seal Collar
-30 °C 100 °C 0,5 m/s 500 bar ECOPUR Ecotal/Ecomid
-20 °C 100 °C 0,5 m/s 500 bar H-ECOPUR Back ring
-40 °C 100 °C 0,5 m/s 500 bar T-ECOPUR Ecotal/Ecomid
-20 °C 100 °C 0,7 m/s 500 bar S-ECOPUR  
-30 °C 100 °C 0,5 m/s 500 bar G-ECOPUR  
                 
Application Profile Description Min temp Max temp Max speed Max pressure Material
S1012-M S1012-M
S1012-M S16-A		 S35-P
S35-P		 Hydraulic, double acting
compact rod seal with almost no dead spots as required for applications in food and pharma industry, also commonly used as O-ring replacement, because design with interference fit on outside diameter maintains non-twisting in dynamic applications.
-30 °C 110 °C 0,4 m/s 400 bar ECOPUR  
-20 °C 110 °C 0,4 m/s 400 bar H-ECOPUR  
-20 °C 110 °C 0,5 m/s 400 bar S-ECOPUR  
-50 °C 110 °C 0,4 m/s 400 bar T-ECOPUR  
-30 °C 110 °C 0,4 m/s 400 bar G-ECOPUR  
                Go Top
                 
                Page 1

© 2006. All rights reserved.

website design: Echo Px