Rod Seals
Application Profile Description Min temp Max temp Max speed Max pressure Material
S01-P S01-P
S01-P S01-P		 S01-P
S01-P		 Hydraulic, single acting
asymmetric rod seal for standard applications. interference fit on outside diameter maintains stabile fit in the housing. design provides ultimate sealing effect over a wide temperature range, good backpumping ability and low tendency to "stick-slip". also used as secondary seal in combination with O-ring activated PTFE-seal type S09.
-30 °C 110 °C 0,5 m/s 400 bar ECOPUR  
-20 °C 110 °C 0,5 m/s 400 bar H-ECOPUR  
-20 °C 110 °C 0,7 m/s 400 bar S-ECOPUR  
-50 °C 110 °C 0,5 m/s 400 bar T-ECOPUR  
-30 °C 110 °C 0,5 m/s 400 bar G-ECOPUR  
                 
Application Profile Description Min temp Max temp Max speed Max pressure Material
S01-P S01-P
S01-P S01-P		 S01-R
S01-R		 Hydraulic, single acting
as profile S01-P, but more adapation possibilities to diverse temperatures and media by selection of suitable seal material.
-30 °C 100 °C 0,5 m/s 160 bar ECORUBBER 1  
-25 °C 150 °C 0,5 m/s 160 bar ECORUBBER-H  
-20 °C 200 °C 0,5 m/s 160 bar ECORUBBER 2  
-50 °C 150 °C 0,5 m/s 160 bar ECORUBBER 3  
-60 °C 200 °C 0 m/s 0 bar ECOSIL  
                 
Application Profile Description Min temp Max temp Max speed Max pressure Material
S01-P S01-P
S01-P S01-P

S02-P
S02P

 Hydraulic, single acting
asymmetric rod seal for standard applications as S01-P, but due to design with active backring suitable for larger extrusion gaps or higher pressure.
S02-P for standard housing design.
        Seal part Backup ring
-30 °C 100 °C 0,5 m/s 700 bar ECOPUR Ecotal /
Ecomid
-30 °C 100 °C 0,5 m/s 700 bar ECOPUR  
-20 °C 100 °C 0,5 m/s 700 bar H-ECOPUR  
-20 °C 100 °C 0,5 m/s 700 bar H-ECOPUR  
-20 °C 100 °C 0,7 m/s 700 bar S-ECOPUR  
-20 °C 100 °C 0,7 m/s 700 bar S-ECOPUR  
-50 °C 100 °C 0,5 m/s 700 bar T-ECOPUR  
-40 °C 100 °C 0,5 m/s 700 bar T-ECOPUR  
-30 °C 100 °C 0,5 m/s 700 bar G-ECOPUR  
-30 °C 100 °C 0,5 m/s 700 bar G-ECOPUR  
                 
Application Profile Description Min temp Max temp Max speed Max pressure Material
S01-P S01-P
S01-P S01-P		 S02-PD
S02-PD		 Hydraulic, single acting
asymmetric rod seal for standard applications as S02-P, but design with triangular backring for short housings.
        Seal part Backup ring
-30 °C 100 °C 0,5 m/s 700 bar ECOPUR ECOTAL
-30 °C 100 °C 0,5 m/s 700 bar ECOPUR ECOMID
-20 °C 100 °C 0,5 m/s 700 bar H-ECOPUR ECOTAL
-20 °C 100 °C 0,5 m/s 700 bar H-ECOPUR ECOMID
-20 °C 100 °C 0,7 m/s 700 bar S-ECOPUR ECOTAL
-20 °C 100 °C 0,7 m/s 700 bar S-ECOPUR ECOMID
-50 °C 100 °C 0,5 m/s 700 bar T-ECOPUR ECOTAL
-40 °C 100 °C 0,5 m/s 700 bar T-ECOPUR ECOMID
-30 °C 100 °C 0,5 m/s 700 bar G-ECOPUR ECOTAL
-30 °C 100 °C 0,5 m/s 700 bar G-ECOPUR ECOMID
                Go Top
Application Profile Description Min temp Max temp Max speed Max pressure Material
S01-P S01-P
S01-P S01-P		 S02-R
S02-R		 Hydraulic, single acting
as profile S02-P, but more adaption possibilities to diverse temperatures and media by selection of suitable seal material.
S02-R for standard housing design.
        Seal part Backup ring
-30 °C 100 °C 0,5 m/s 250 bar ECORUBBER 1 ECOTAL
-30 °C 100 °C 0,5 m/s 250 bar ECORUBBER 1 ECOMID
-20 °C 200 °C 0,5 m/s 250 bar ECORUBBER 2 ECOFLON 2
-50 °C 100 °C 0,5 m/s 250 bar ECORUBBER 3 ECOTAL
-40 °C 100 °C 0,5 m/s 250 bar ECORUBBER 3 ECOMID
-50 °C 150 °C 0,5 m/s 250 bar ECORUBBER 3 ECOFLON 2
-25 °C 100 °C 0,5 m/s 250 bar ECORUBBER-H ECOTAL
-25 °C 100 °C 0,5 m/s 250 bar ECORUBBER-H ECOMID
-25 °C 150 °C 0,5 m/s 250 bar ECORUBBER-H ECOFLON 2
                 
Application Profile Description Min temp Max temp Max speed Max pressure Material
S01-P S01-P
S01-P S01-P		 S02-RD
S02-RD		 Hydraulic, single acting
asymmetric rod seal for standard applications as S02-R, but design with triangular backring for short housings
        Seal part Backup ring
-30 °C 100 °C 0,5 m/s 250 bar ECORUBBER 1 ECOTAL
-30 °C 100 °C 0,5 m/s 250 bar ECORUBBER 1 ECOMID
-20 °C 200 °C 0,5 m/s 250 bar ECORUBBER 2 ECOFLON 2
-50 °C 100 °C 0,5 m/s 250 bar ECORUBBER 3 ECOTAL
-40 °C 100 °C 0,5 m/s 250 bar ECORUBBER 3 ECOMID
-50 °C 150 °C 0,5 m/s 250 bar ECORUBBER 3 ECOFLON 2
-25 °C 100 °C 0,5 m/s 250 bar ECORUBBER-H ECOTAL
-25 °C 100 °C 0,5 m/s 250 bar ECORUBBER-H ECOMID
-25 °C 150 °C 0,5 m/s 250 bar ECORUBBER-H ECOFLON 2
                 
Application Profile Description Min temp Max temp Max speed Max pressure Material
S03-P S03-P S03-P
S03-P		 Hydraulic, single acting
O-ring activated, asymmetrical rod seal. interference fit on outside diameter maintains stable fit in the housing. design provides ultimate sealing effect. especially suitable for short stroke applications (e.g. spindle seals, coupling actuators...)
        Seal part O ring
-30 °C 100 °C 0,5 m/s 400 bar ECOPUR NBR70
-20 °C 100 °C 0,5 m/s 400 bar H-ECOPUR NBR70
-20 °C 100 °C 0,7 m/s 400 bar S-ECOPUR NBR70
-50 °C 100 °C 0,5 m/s 400 bar T-ECOPUR NBR70
-30 °C 100 °C 0,5 m/s 400 bar G-ECOPUR NBR70
                 
Application Profile Description Min temp Max temp Max speed Max pressure Material
S03-P S03-P S03-F
S03-F		 PTFE-rodseal, single acting
O-ring activated, asymmetrical PTFE rod seal, low friction and good dry running properties. good adaption possibilities to diverse temperatures and media by selection of suitable O-ring material, almost no dead spots as required for applications in food and pharma industry.
        Seal part O ring
-20 °C 200 °C 1 m/s 100 bar ECOFLON 1 FPM75
-20 °C 200 °C 1 m/s 160 bar ECOFLON 2 FPM75
-25 °C 150 °C 1 m/s 100 bar ECOFLON 1 ECORUBBER-H
-25 °C 150 °C 1 m/s 160 bar ECOFLON 2 ECORUBBER-H
-60 °C 80 °C 0,5 m/s 200 bar ECOPE MVQ70
-60 °C 200 °C 1 m/s 100 bar ECOFLON 1 MVQ70
-60 °C 200 °C 1 m/s 160 bar ECOFLON 2 MVQ70
                 
Application Profile Description Min temp Max temp Max speed Max pressure Material
S03-P S03-P S03-S
S03-S		 PTFE-rodseal, single acting
helicoil spring activated, asymmetrical PTFE rod seal, low friction and good dry running properties, excellent chemical and thermal resistance, mainly used in chemical, pharma and food industry.
        Seal part Spring
-200 °C 260 °C 1 m/s 100 bar ECOFLON 1 1.4310
-200 °C 260 °C 1 m/s 160 bar ECOFLON 2 1.4310
-200 °C 80 °C 1 m/s 200 bar ECOPE 1.4310
                Go Top
Application Profile Description Min temp Max temp Max speed Max pressure Material
              Seal part Back-up ring
S03-P S03-P S04-P
S04-P		 Hydraulic, single acting
asymmetrical rod seal for standard applications as S03-P, but due to design with active back-up ring suitable for larger extrusion gaps orhigher pressure.
S04-P for standard housing design.
-30 °C 100 °C 0,5 m/s 700 bar ECOPUR

Ecotal / Ecomid

-30 °C 100 °C 0,5 m/s 700 bar ECOPUR O - Ring
-20 °C 100 °C 0,5 m/s 700 bar H-ECOPUR NBR 70 Sh.A
-20 °C 100 °C 0,5 m/s 700 bar H-ECOPUR  
-20 °C 100 °C 0,7 m/s 700 bar S-ECOPUR  
-20 °C 100 °C 0,7 m/s 700 bar S-ECOPUR  
-30 °C 100 °C 0,5 m/s 700 bar T-ECOPUR  
-30 °C 100 °C 0,5 m/s 700 bar T-ECOPUR  
-30 °C 100 °C 0,5 m/s 700 bar G-ECOPUR  
-30 °C 100 °C 0,5 m/s 700 bar G-ECOPUR  
                 
Application Profile Description Min temp Max temp Max speed Max pressure Material
S03-P S03-P

S04-PD
S04-PD

 Hydraulic, single acting
asymmetric rod seal for standard applications as S04-P, but design with triangular backring for short housings
        Seal part Backup ring
-30 °C 100 °C 0,5 m/s 700 bar ECOPUR

Ecotal / Ecomid
-30 °C 100 °C 0,5 m/s 700 bar ECOPUR O - Ring
-20 °C 100 °C 0,5 m/s 700 bar H-ECOPUR NBR 70 Sh.A
-20 °C 100 °C 0,5 m/s 700 bar H-ECOPUR  
-20 °C 100 °C 0,7 m/s 700 bar S-ECOPUR  
-20 °C 100 °C 0,7 m/s 700 bar S-ECOPUR  
-30 °C 100 °C 0,5 m/s 700 bar T-ECOPUR  
-30 °C 100 °C 0,5 m/s 700 bar T-ECOPUR  
-30 °C 100 °C 0,5 m/s 700 bar G-ECOPUR  
-30 °C 100 °C 0,5 m/s 700 bar G-ECOPUR  
                 
Application Profile Description Min temp Max temp Max speed Max pressure Material
S03-P S05-PS05-P
 Pneumatic,Single acting asymmetric rod seal, extremely wear resistant, for use in lubricated or dry pneumatic applications. Special design of sealing lip allows retention of initial lubricating film
-30 °C 110°C 1m/s 25 bar ECOPUR  
-20 °C 110°C 1m/s 25 bar H-ECOPUR  
-20 °C 110°C 2m/s 25 bar S-ECOPUR  
-50 °C 110°C 1m/s 25 bar T-ECOPUR  
-50 °C 110°C 1m/s 25 bar G-ECOPUR  
                 
Application Profile Description Min temp Max temp Max speed Max pressure Material
S03-P S05-R
S05-R		 Pneumatic,Single acting as profile S05-R, good wear resistance and adaptation possiblities for diverse temperatures and media by selection of suitable seal material. Special design of sealing lip allows retention of initial lubricating film
-30 °C 80 °C 1m/s 25 bar Ecorubber 1  
-20 °C 200°C 1m/s 25 bar Ecorubber 2  
-50 °C 150 °C 1m/s 25 bar Ecorubber 3  
-25 °C 150 °C 1m/s 25 bar Ecorubber-H  
                Go Top
Application Profile Description Min temp Max temp Max speed Max pressure Material
S03-P S03-P S06-P
S06-P		 Hydraulic, single acting
symmetric rod seal for simple standard applications, not recommended for new designs (profile S01-P should be prefered)
-30 °C 110 °C 0,5 m/s 400 bar ECOPUR  
-20 °C 110 °C 0,5 m/s 400 bar H-ECOPUR  
-20 °C 110 °C 0,7 m/s 400 bar S-ECOPUR  
-50 °C 110 °C 0,5 m/s 400 bar T-ECOPUR  
-30 °C 110 °C 0,5 m/s 400 bar G-ECOPUR  
                 
Application Profile Description Min temp Max temp Max speed Max pressure Material
S03-P S03-P S06-R
S06-R		 Hydraulic, single acting
as profile S06-P, but more adaption possibilities to diverse temperatures and media by selection of suitable seal material.
-30 °C 100 °C 0,5 m/s 160 bar ECORUBBER 1  
-25 °C 150 °C 0,5 m/s 160 bar ECORUBBER-H  
-20 °C 200 °C 0,5 m/s 160 bar ECORUBBER 2  
-50 °C 150 °C 0,5 m/s 160 bar ECORUBBER 3  
-60 °C 200 °C 0 m/s 0 bar ECOSIL  
                 
Application Profile Description Min temp Max temp Max speed Max pressure Material
S03-P S03-P S07-P
S07-P		 Hydraulic, single acting
O-ring activated symmetric rod seal for simple standard applications, not recommended for new designs (profile S03-P prefered)
        Seal part O ring
-30 °C 100 °C 0,5 m/s 400 bar ECOPUR NBR70
-20 °C 100 °C 0,5 m/s 400 bar H-ECOPUR NBR70
-20 °C 100 °C 0,7 m/s 400 bar S-ECOPUR NBR70
-50 °C 100 °C 0,5 m/s 400 bar T-ECOPUR NBR70
-30 °C 100 °C 0,5 m/s 400 bar G-ECOPUR NBR70
                 
Application Profile Description Min temp Max temp Max speed Max pressure Material
S03-P S03-P S08-P
S08-P		 Hydraulic, single acting
asymmetric compact rod seal, interference fit on outside diameter maintains stable fit in the housing. compact design mainly used to seal high viscosity fluids or for extreme small housings, not suitable for high speed applications. S08-P compact design, no groove
-30 °C 110 °C 0,3 m/s 400 bar ECOPUR  
-20 °C 110 °C 0,3 m/s 400 bar H-ECOPUR  
-20 °C 110 °C 0,4 m/s 400 bar S-ECOPUR  
-50 °C 110 °C 0,3 m/s 400 bar T-ECOPUR  
-30 °C 110 °C 0,3 m/s 400 bar G-ECOPUR  
                 
Application Profile Description Min temp Max temp Max speed Max pressure Material
S03-P S03-P S08-PE
S08-PE		 Hydraulic, single acting
asymmetric compact rod seal, interference fit on outside diameter maintains stable fit in the housing. compact design mainly used to seal high viscosity fluids or for extreme small housings, not suitable for high speed applications. S08-PE with small groove
-30 °C 110 °C 0,3 m/s 400 bar ECOPUR  
-20 °C 110 °C 0,3 m/s 400 bar H-ECOPUR  
-20 °C 110 °C 0,4 m/s 400 bar S-ECOPUR  
-50 °C 110 °C 0,3 m/s 400 bar T-ECOPUR  
-30 °C 110 °C 0,3 m/s 400 bar G-ECOPUR  
                Go Top
Application Profile Description Min temp Max temp Max speed Max pressure Material
S03-P S03-P S08-R
S08-R		 Hydraulic, single acting
as profile S08-P, but more adaptation possibilities to diverse temperatures and media by selection of suitable seal material.
-30 °C 100°C 0.3m/s 160 bar ECORUBBER 1  
-20 °C 200°C 0.3m/s 160 bar ECORUBBER 2  
-50 °C 150°C 0.3m/s 160 bar ECORUBBER 3  
-25 °C 150°C 0.3m/s 160 bar ECORUBBER-H  
                 
Application Profile Description Min temp Max temp Max speed Max pressure Material
S03-P S09-E
S09-E		 Hydraulic, single acting
O-ring activated asymmetric PTFE rod seal, low friction. in tandem design together with double acting wipers for extreme low or high speed or positioning facilities. as primary seal in combination with secondary SO1-P seal with good resistance to pressure shocks used in mobile hydraulics, machine tools, injection moulding machines, heavy hydraulics.
        Glide ring O ring
-20 °C 200 °C 10 m/s 400 bar Ecoflon-2/3/4
Ecope		 FPM75
-50 °C 150 °C 10 m/s 400 bar   EPDM70
-60 °C 200 °C 10 m/s 400 bar   MVQ70
-30 °C 100 °C 10 m/s 400 bar   NBR70
                 
Application Profile Description Min temp Max temp Max speed Max pressure Material
S09-D S09-D S09-D
S09-D		 Hydraulic, double acting
O-ring activated symmetric PTFE rod seal, low friction. for extreme low or high speed, suitable for positioning functions.
        Glide ring O ring
-30 °C 100 °C 10 m/s 400 bar Ecoflon-2/3/4 NBR70
-20 °C 200 °C 10 m/s 400 bar   FPM/FKM 75
-50 °C 150 °C 10 m/s 400 bar   EPDM70
-60 °C 200 °C 10 m/s 400 bar   MVQ70
-30 °C 100 °C 10 m/s 400 bar Ecope MVK70/Ecosil
                 
Application Profile Description Min temp Max temp Max speed Max pressure Material
S09-D S09-P
S09-P		 Hydraulic, single acting
O-ring activated asymmetric PU rod seal with excellent dynamic sealing capacity. used as secondary seal in tandem design (together with primary S09-E seal) to minimize residual oil film. for mobile hydraulics, machine tools, injection moulding machines, heavy hydraulics. 		        Glide ring Energizer
-30 °C 100 °C 1 m/s 400 bar ECOPUR NBR70
-20 °C 100 °C 1 m/s 400 bar H-ECOPUR NBR70
-20 °C 100 °C 1,4 m/s 400 bar S-ECOPUR NBR70
-50 °C 100 °C 1 m/s 400 bar T-ECOPUR NBR70
-30 °C 100 °C 1 m/s 400 bar G-ECOPUR NBR70
                 
Application Profile Description Min temp Max temp Max speed Max pressure Material
S09-D S09-ES
S09-ES		 Hydraulic, single acting
profile ring-activated asymmetric PTFE rod seal, similar to S09-E, but special heavy duty design for heavy industry hydraulics or for special housing dimension.
        Glide ring Energizer
-30 °C 100 °C 10 m/s 400 bar Ecoflon-2/3/4 ECORUBBER 1
-20 °C 200 °C 10 m/s 400 bar Ecoflon-2/3/4

ECORUBBER 2
-50 °C 150 °C 10 m/s 400 bar Ecoflon-2/3/4

ECORUBBER 3
-25 °C 150 °C 10 m/s 400 bar Ecoflon-2/3/4

ECORUBBER-H
                 
Application Profile Description Min temp Max temp Max speed Max pressure Material
S09-D S09-D S09-DS
S09-DS		 Hydraulic, double acting
profile ring-activated symmetric PTFE rod seal, similar to S09-D, but special heavy duty design for heavy industry hydraulics or for special housing dimension.
        Glide ring Energizer
-30 °C 100 °C 10 m/s 400 bar Ecoflon-2/3/4 ECORUBBER 1
-20 °C 200 °C 10 m/s 400 bar Ecoflon-2/3/4

ECORUBBER 2
-50 °C 150 °C 10 m/s 400 bar Ecoflon-2/3/4

ECORUBBER 3
-25 °C 150 °C 10 m/s 400 bar Ecoflon-2/3/4

ECORUBBER-H
                 
Application Profile Description Min temp Max temp Max speed Max pressure Material
S1012-M S1012-M
S1012-M		 S1012-M
S1012-M		 Hydraulic, single acting
chevron sealing set, parting surface design for heavy industry hydraulics.
-30 °C 100°C 0.5m/s 500 bar
S10-A
Ecotal/
Ecomid		 S11-M
Ecotal/
Ecomid		 S12-M
Ecopur
H-Ecopur
T-Ecopur
S-Ecopur
G-Ecopur
Ecoflon2 Ecorub1
Ecorub2
Ecorub3
EcorubH		 Ecoflon2
-20 °C 100°C 0.5 m/s 500 bar
-40 °C 100°C 0.5 m/s 500 bar
-20 °C 100°C 0.7 m/s 500 bar
-30 °C 100°C 0.5 m/s 500 bar
-30 °C 100°C 0.5 m/s 250 bar
-20 °C 200 °C 0.5 m/s 250 bar
-50 °C -150 °C 0.5 m/s 250 bar
-25 °C -150 °C 0.5 m/s 250 bar
                Go Top
                 
                Page 2

© 2006. All rights reserved.

website design: Echo Px