final e1741159582220
final e1741159582220
final e1741159582220

ROD Seals

Rod seals are used in hydraulic cylinders for fluid sealing. They are external to the cylinder head and seal against the cylinder’s rod, preventing leakage of fluid from within the cylinder to the outside. No double-acting hydraulic or pneumatic system could function without a rod seal (except systems with wiper seals).

The selection criteria for rod seals arise from a number of several factors:

  • Space requirement in the design area
  • General system type (press, construction machinery, industrial cylinder etc.)
  • Sliding speed
  • Pressure load and/or gap width
  • Open or closed installation space
  • Temperature and medium (important for selection of material)
Untitled design 13
SWA101 26
min.Temp max.Temp max. Speed max. Pressure Material
– 20* C
115° C
max.0.4m/s
max. 400 Bar
HPU 94*
– 20* C
115* C
max.0.4m/s
max. 400 Bar
HPU 55* D
                   
– 20* C
110* C
max.0.5m/s
max. 400 Bar
SL-PU 94*
                   
-50°C
110° C
max.0.4m/s
max. 400 Bar
LT-PU 94*
                   
SWA101 27
min.Temp max.Temp max. Speed max. Pressure Material
– 30* C
110° C
max.0,5m/s
max. 160 Bar
NBR 85*
                   
– 20* C
150* C
max.0,5m/s
max. 160 Bar
H-NBR 85*
                   
– 20* C
220* C
max.0,5m/s
max. 160 Bar
FPM 82*
                   
– 45* C
130° C
max.0,5m/s
max. 160 Bar
EPDM 85*
                   
– 60* C
200* C
max.0,3m/s
max. 120 Bar
MVQ 85*
                   

SWS101

1
  • Primary Application
  • Application Limits
  • Not applicable
SWA101 28
min.Temp max.Temp max. Speed max. Pressure Material / Backring
– 20* C
115° C
max.0.5m/s
max. 400 Bar
HPU 94*
POM/PTFE/PEEK
– 20* C
115* C
max.0.5m/s
max. 400 Bar
HPU 55* D
POM/PTFE/PEEK
– 20* C
110* C
max.0.5m/s
max. 400 Bar
SL-PU 94*
POM/PTFE/PEEK
– 50° C
110° C
max.0.5m/s
max. 400 Bar
LT-PU 94*
POM/PTFE/PEEK
SWA101 29
min.Temp max.Temp max. Speed max. Pressure Material / Backring
– 30* C
110° C
max.0,5m/s
max. 250 Bar
NBR 85*
POM/PTFE/PEEK
– 20* C
150* C
max.0,5m/s
max. 250 Bar
H-NBR 85*
POM/PTFE/PEEK
– 20* C
220* C
max.0,5m/s
max. 250 Bar
FPM 82*
POM/PTFE/PEEK
– 45* C
130° C
max.0,5m/s
max. 250 Bar
EPDM 85*
POM/PTFE/PEEK
– 60* C
200* C
max.0,4m/s
max. 250 Bar
MVQ 85*
POM/PTFE/PEEK

SWS102

1 1 2
  • Primary Application
  • Application Limits
  • Not applicable
SWA101 30
min.Temp max.Temp max. Speed max. Pressure Material / Case
– 20* C
115° C
max.0.5m/s
max. 400 Bar
HPU 94*
POM/PTFE/PEEK
– 20* C
115* C
max.0.5m/s
max. 400 Bar
HPU 55* D
POM/PTFE/PEEK
– 20* C
110* C
max.0.5m/s
max. 400 Bar
SL-PU 94*
POM/PTFE/PEEK
– 50° C
110° C
max.0.5m/s
max. 400 Bar
LT-PU 94*
POM/PTFE/PEEK
SWA101 31
min.Temp max.Temp max. Speed max. Pressure Material / Case
– 30* C
110° C
max.0,5m/s
max. 250 Bar
NBR 85*
POM/PTFE/PEEK
– 20* C
150* C
max.0,5m/s
max. 250 Bar
H-NBR 85*
POM/PTFE/PEEK
– 20* C
220* C
max.0,5m/s
max. 250 Bar
FPM 82*
POM/PTFE/PEEK
– 45* C
130° C
max.0,5m/s
max. 250 Bar
EPDM 85*
POM/PTFE/PEEK
– 60* C
200* C
max.0,4m/s
max. 250 Bar
MVQ 85*
POM/PTFE/PEEK

SWS102-R

1 1 2
  • Primary Application
  • Application Limits
  • Not applicable
SWA101 32
min.Temp max.Temp max. Speed max. Pressure Material / O-Ring
– 20* C
115° C
max.0.4m/s
max.400bar
HPU 94*
NBR70*/FPM*75*
– 20* C
115* C
max.0.4m/s
max.400bar
HPU 55* D
NBR70*/FPM*75*
– 20* C
110* C
max.0.5m/s
max.400bar
SL-PU 94*
NBR70*/FPM*75*
– 50° C
110° C
max.0.4m/s
max.400bar
LT-PU 94*
NBR70*/FPM*75*
SWA101 33
min.Temp max.Temp max. Speed max. Pressure Material / O-Ring
– 30* C
110° C
max.0,5m/s
max.160bar
NBR 85*
NBR70*/FPM*75*
– 20* C
150* C
max.0,5m/s
max.160bar
H-NBR 85*
NBR70*/FPM*75*
– 20* C
220* C
max.0,5m/s
max.160bar
FPM 82*
NBR70*/FPM*75*
– 45* C
130° C
max.0,5m/s
max.160bar
EPDM 85*
NBR70*/FPM*75*
– 60* C
200* C
max.0,3m/s
max.160bar
MVQ 85*
NBR70*/FPM*75*

SWS103

1 1 1
  • Primary Application
  • Application Limits
  • Not applicable
SWA101 34
min.Temp max.Temp max. Speed max. Pressure Material / Backring
– 20* C
115° C
max.0.5m/s
max.400bar
HPU 94*
POM/PTFE/PEEK
– 20* C
115* C
max.0.5m/s
max.400bar
HPU 55* D
POM/PTFE/PEEK
– 20* C
110* C
max.0.5m/s
max.400bar
SL-PU 94*
POM/PTFE/PEEK
– 50° C
110° C
max.0.5m/s
max.400bar
LT-PU 94*
POM/PTFE/PEEK
SWA101 35
min.Temp max.Temp max. Speed max. Pressure Material / O- RIng
– 30* C
110° C
max.0,5m/s
max.250bar
NBR 85*
NBR70*/FPM75*
– 20* C
150* C
max.0,5m/s
max.250bar
H-NBR 85*
NBR70*/FPM75*
– 20* C
220* C
max.0,5m/s
max.250bar
FPM 82*
NBR70*/FPM75*
– 45* C
130° C
max.0,5m/s
max.250bar
EPDM 85*
NBR70*/FPM75*
– 60* C
200* C
max.0,4m/s
max.250bar
MVQ 85*
NBR70*/FPM75*

SWS104

1 2
  • Primary Application
  • Application Limits
  • Not applicable
600x400 1
min.Temp max.Temp max. Speed max. Pressure Material / Case
– 20* C
115° C
max.0.5m/s
max.500bar
HPU 94*
POM/PTFE/PEEK
– 20* C
115* C
max.0.5m/s
max.500bar
HPU 55* D
POM/PTFE/PEEK
– 20* C
110* C
max.0.7m/s
max.500bar
SL-PU 94*
POM/PTFE/PEEK
– 50° C
110° C
max.0.5m/s
max.500bar
LT-PU 94*
POM/PTFE/PEEK
600x400 2
min.Temp max.Temp max. Speed max. Pressure Material / Case
– 30* C
110° C
max.0,5m/s
max.200bar
NBR 85*
NBR70*/FPM 75*
– 20* C
150* C
max.0,5m/s
max.200bar
H-NBR 85*
NBR70*/FPM 75*
– 20* C
220* C
max.0,5m/s
max.200bar
FPM 82*
NBR70*/FPM 75*
– 45* C
130° C
max.0,5m/s
max.200bar
EPDM 85*
NBR70*/FPM 75*
– 60* C
200* C
max.0,4m/s
max.200bar
MVQ 85*
NBR70*/FPM 75*

SWS104-R

1 3
  • Primary Application
  • Application Limits
  • Not applicable
600x400 3
min.Temp max.Temp max. Speed max. Pressure Material
– 20* C
115° C
max.0.4m/s
max.400bar
HPU 94*
                   
– 20* C
115* C
max.0.4m/s
max.400bar
HPU 55* D
                   
– 20* C
110* C
max.0.5m/s
max.400bar
SL-PU 94*
                   
– 50° C
110° C
max.0.4m/s
max.400bar
LT-PU 94*
                   
600x400 4
min.Temp max.Temp max. Speed max. Pressure Material
– 30* C
110° C
max.0,5m/s
max.160bar
NBR 85*
                   
– 20* C
150* C
max.0,5m/s
max.160bar
H-NBR 85*
                   
– 20* C
220* C
max.0,5m/s
max.160bar
FPM 82*
                   
– 45* C
130° C
max.0,5m/s
max.160bar
EPDM 85*
                   
– 60* C
200* C
max.0,3m/s
max.120bar
MVQ 85*
                   

SWS105

1 1
  • Primary Application
  • Application Limits
  • Not applicable
600x400 5
min.Temp max.Temp max. Speed max. Pressure Material
– 20* C
115° C
max.0.4m/s
max.400bar
HPU 94*
                   
– 20* C
115* C
max.0.4m/s
max.400bar
HPU 55* D
                   
– 20* C
110* C
max.0.5m/s
max.400bar
SL-PU 94*
                   
– 50° C
110° C
max.0.4m/s
max.400bar
LT-PU 94*
                   
600x400 6
min.Temp max.Temp max. Speed max. Pressure Material
– 30* C
110° C
max.0,5m/s
max.160bar
NBR 85*
                   
– 20* C
150* C
max.0,5m/s
max.160bar
H-NBR 85*
                   
– 20* C
220* C
max.0,5m/s
max.160bar
FPM 82*
                   
– 45* C
130° C
max.0,5m/s
max.160bar
EPDM 85*
                   
– 60* C
200* C
max.0,3m/s
max.160bar
MVQ 85*
                   

SWS205

1
  • Primary Application
  • Application Limits
  • Not applicable
600x400 7
min.Temp max.Temp max. Speed max. Pressure Material / O-Ring
– 20* C
115° C
max.0.4m/s
max.400bar
HPU 94*
NBR70*/FPM75*
– 20* C
115* C
max.0.4m/s
max.400bar
HPU 55* D
NBR70*/FPM75*
– 20* C
110* C
max.0.5m/s
max.400bar
SL-PU 94*
NBR70*/FPM75*
– 50° C
110° C
max.0.4m/s
max.400bar
LT-PU 94*
NBR70*/FPM75*
600x400 8
min.Temp max.Temp max. Speed max. Pressure Material / O-RIng
– 30* C
110° C
max.0,5m/s
max.250bar
NBR 85*
NBR70*/FPM75*
– 20* C
150* C
max.0,5m/s
max.250bar
H-NBR 85*
NBR70*/FPM75*
– 20* C
220* C
max.0,5m/s
max.250bar
FPM 82*
NBR70*/FPM75*
– 45* C
130° C
max.0,5m/s
max.250bar
EPDM 85*
NBR70*/FPM75*
– 60* C
200* C
max.0,4m/s
max.250bar
MVQ 85*
NBR70*/FPM75*

SWS107

1 3
  • Primary Application
  • Application Limits
  • Not applicable
600x400 9
min.Temp max.Temp max. Speed max. Pressure Material
– 20* C
115° C
max.0.4m/s
Max.400bar
HPU 94*
                   
– 20* C
115* C
max.0.4m/s
Max.400bar
HPU 55* D
                   
– 20* C
110* C
max.0.5m/s
Max.400bar
SL-PU 94*
                   
– 50° C
110° C
max.0.4m/s
Max.400bar
LT-PU 94*
                   
600x400 10
min.Temp max.Temp max. Speed max. Pressure Material
– 30* C
110° C
max.0,5m/s
Max.160bar
NBR 85*
                   
– 20* C
150* C
max.0,5m/s
Max.160bar
H-NBR 85*
                   
– 20* C
220* C
max.0,5m/s
Max.160bar
FPM 82*
                   
– 45* C
130° C
max.0,5m/s
Max.160bar
EPDM 85*
                   
– 60* C
200* C
max.0,3m/s
Max.120bar
MVQ 85*
                   

SWS106

1 3 1
  • Primary Application
  • Application Limits
  • Not applicable
600x400 11
min.Temp max.Temp max. Speed max. Pressure Material
– 20* C
115° C
max.0.5m/s
max.400bar
HPU 94*
                   
– 20* C
115* C
max.0.5m/s
max.400bar
HPU 55* D
                   
– 20* C
110* C
max.0.5m/s
max.400bar
SL-PU 94*
                   
– 50° C
110° C
max.0.5m/s
max.400bar
LT-PU 94*
                   
600x400 12
min.Temp max.Temp max. Speed max. Pressure Material
– 30* C
110° C
max.0,5m/s
max.250bar
NBR 85*
                   
– 20* C
150* C
max.0,5m/s
max.250bar
H-NBR 85*
                   
– 20* C
220* C
max.0,5m/s
max.250bar
FPM 82*
                   
– 45* C
130° C
max.0,5m/s
max.250bar
EPDM 85*
                   
– 60* C
200* C
max.0,4m/s
max.250bar
MVQ 85*
                   

SWS108

1
  • Primary Application
  • Application Limits
  • Not applicable
600x400 13
min.Temp max.Temp max. Speed max. Pressure Material / O-Ring
– 200* C
260*C
max.10m/s
max.400bar
PTFE pure
NBR70*/FPM75*
– 200* C
260*C
max.10m/s
max.400bar
PTFE 1 glass
NBR70*/FPM75*
– 200* C
260*C
max.10m/s
max.400bar
PTFE 2 bronze
NBR70*/FPM75*
– 200* C
260*C
max.10m/s
max.400bar
PTFE carbone
NBR70*/FPM75*
min.Temp max.Temp max. Speed max. Pressure Material/O-Ring
-200*C
260° C
max.10m/s
max.400bar
PTFE DO5turqu
NBR70*/FPM75*
-200*C
260° C
max.10m/s
max.400bar
PTFE DO5glass
NBR70*/FPM75*
-200*C
260° C
max.10m/s
max.400bar
PTFE graphite
NBR70*/FPM75*
-200*C
260° C
max.10m/s
max.400bar
PTFE ekonil
NBR70*/FPM75*
-200*C
260° C
max.10m/s
max.400bar
PTFE 25% glass
NBR70*/FPM75*

SWS109

1 4
  • Primary Application
  • Application Limits
  • Not applicable
SWS109 1
min.Temp max.Temp max. Speed max. Pressure Material / O-Ring
– 20* C
115*C
max.0.4m/s
max.500bar
HPU 94
POM/PTFE/PEEK
– 20* C
115*C
max.0.4m/s
max.500bar
HPU 55’D
POM/PTFE/PEEK
– 20* C
110*C
max.0.5m/s
max.500bar
SL-PU 94″
POM/PTFE/PEEK
– 50* C
110*C
max.0.4m/s
max.500bar
LT-PU 94
POM/PTFE/PEEK
150x80 2 1
min.Temp max.Temp max. Speed max. Pressure Material/O-Ring
-30*C
110° C
max.0,5m/s
max.160bar
NBR 85
POM/PTFE/PEEK
-20*C
150° C
max.0,5m/s
max.160bar
H-NBR 85
POM/PTFE/PEEK
-20*C
220° C
max.0,5m/s
max.160bar
FPM 82
POM/PTFE/PEEK
-45*C
130° C
max.0,5m/s
max.160bar
EPDM 85′
POM/PTFE/PEEK
-60*C
200° C
max.0,5m/s
max.160bar
MVQ 85
POM/PTFE/PEEK

SWS110-112

650x100
  • Primary Application
  • Application Limits
  • Not applicable
150x80 (1)
min.Temp max.Temp max. Speed max. Pressure Material
– 20* C
115° C
max.0.5m/s
max.160bar
HPU 94
                   
– 20* C
115° C
max.0.5m/s
max.160bar
HPU 55 D
                   
– 20* C
110° C
max.0.5m/s
max.160bar
SL-PU 94
                   
– 50* C
110° C
max.0.5m/s
max.160bar
LT-PU 94
                   
150x80 (3)
min.Temp max.Temp max. Speed max. Pressure Material
– 30* C
115° C
max.0.5m/s
max.120bar
NBR 85
                   
– 20* C
150* C
max.0.5m/s
max.120bar
H-NBR 85
                   
– 20* C
220* C
max.0.5m/s
max.120bar
FPM 82
                   
– 45* C
130* C
max.0.5m/s
max.120bar
EPDM 85
                   
– 60* C
200* C
max.0.4m/s
max.120bar
MVQ 85
                   

SWS116

650x100 1 1
  • Primary Application
  • Application Limits
  • Not applicable
150x80 (4)
min.Temp max.Temp max. Speed max. Pressure Material
– 20* C
115° C
max.0.5m/s
max.400bar
HPU 94
                   
– 20* C
115° C
max.0.5m/s
max.400bar
HPU 55 D
                   
– 20* C
110° C
max.0.5m/s
max.400bar
SL-PU 94
                   
– 50* C
110° C
max.0.5m/s
max.400bar
LT-PU 94
                   
150x80 (5)
min.Temp max.Temp max. Speed max. Pressure Material
– 30* C
115° C
max.0.5m/s
max.250bar
NBR 85
                   
– 20* C
150* C
max.0.5m/s
max.250bar
H-NBR 85
                   
– 20* C
220* C
max.0.5m/s
max.250bar
FPM 82
                   
– 45* C
130* C
max.0.5m/s
max.250bar
EPDM 85
                   
– 60* C
200* C
max.0.4m/s
max.250bar
MVQ 85
                   

SWS117

650x100 2 1
  • Primary Application
  • Application Limits
  • Not applicable
150x80 (6)
min.Temp max.Temp max. Speed max. Pressure Material
– 20* C
115° C
max.0.4m/s
max.400bar
HPU 94
POM/PTFE/PEEK
– 20* C
115° C
max.0.4m/s
max.400bar
HPU 55 D
POM/PTFE/PEEK
– 20* C
110° C
max.0.5m/s
max.400bar
SL-PU 94
POM/PTFE/PEEK
– 50* C
110° C
max.0.4m/s
max.400bar
LT-PU 94
POM/PTFE/PEEK
150x80 (7)
min.Temp max.Temp max. Speed max. Pressure Material
– 30* C
110° C
max.0.5m/s
max.160bar
NBR 85
POM/PTFE/PEEK
– 20* C
150* C
max.0.5m/s
max.160bar
H-NBR 85
POM/PTFE/PEEK
– 20* C
220* C
max.0.5m/s
max.160bar
FPM 82
POM/PTFE/PEEK
– 45* C
130* C
max.0.5m/s
max.160bar
EPDM 85
POM/PTFE/PEEK
– 60* C
200* C
max.0.3m/s
max.120bar
MVQ 85
POM/PTFE/PEEK

SWS17-R

650x100 3 1
  • Primary Application
  • Application Limits
  • Not applicable
150x80 8
min.Temp max.Temp max. Speed max. Pressure Material / O-Ring
– 200* C
260*C
max.15m/s
max.100bar
PTFE pure
1.4310
– 200* C
260*C
max.15m/s
max.160bar
PTFE 1 glass
1.4310
– 200* C
260*C
max.15m/s
max.160bar
PTFE 2 bronze
1.4310
– 200* C
260*C
max.15m/s
max.100bar
PTFE carbone
1.4310
min.Temp max.Temp max. Speed max. Pressure Material/O-Ring
-200*C
-260*C
max.15m/s
max.100bar
PTFE D05 turq
1.4310
-200*C
-260*C
max.15m/s
max.160bar
PTFE D05 glass
1.4310
-200*C
-260*C
max.15m/s
max.160bar
PTFE graphite
1.4310
-200*C
-260*C
max.15m/s
max.160bar
PTFE ekonol
1.4310
-200*C
-260*C
max.15m/s
max.160bar
PTFE 25%glass
1.4310

SWS118

650x100 4 1
  • Primary Application
  • Application Limits
  • Not applicable
150x80 9
min.Temp max.Temp max. Speed max. Pressure Material / O-Ring
– 200* C
260*C
max.15m/s
max.100bar
PTFE pure
1.4310
– 200* C
260*C
max.15m/s
max.160bar
PTFE 1 glass
1.4310
– 200* C
260*C
max.15m/s
max.160bar
PTFE 2 bronze
1.4310
– 200* C
260*C
max.15m/s
max.100bar
PTFE carbone
1.4310
min.Temp max.Temp max. Speed max. Pressure Material/O-Ring
-200*C
-260*C
max.15m/s
max.100bar
PTFE D05 turq
1.4310
-200*C
-260*C
max.15m/s
max.160bar
PTFE D05 glass
1.4310
-200*C
-260*C
max.15m/s
max.160bar
PTFE graphite
1.4310
-200*C
-260*C
max.15m/s
max.160bar
PTFE ekonol
1.4310
-200*C
-260*C
max.15m/s
max.160bar
PTFE 25%glass
1.4310

SWS119

650x100 3 3
  • Primary Application
  • Application Limits
  • Not applicable
150x80 (10)
min.Temp max.Temp max. Speed max. Pressure Material
– 20* C
115° C
max.0.4m/s
max.500bar
HPU 94
POM/PTFE/PEEK
– 20* C
115° C
max.0.4m/s
max.500bar
HPU 55 D
POM/PTFE/PEEK
– 20* C
110° C
max.0.5m/s
max.500bar
SL-PU 94
POM/PTFE/PEEK
– 50* C
110° C
max.0.4m/s
max.500bar
LT-PU 94
POM/PTFE/PEEK
150x80 (11)
min.Temp max.Temp max. Speed max. Pressure Material
– 30* C
110° C
max.0.5m/s
max.160bar
NBR 85
POM/PTFE/PEEK
– 20* C
150* C
max.0.5m/s
max.160bar
H-NBR 85
POM/PTFE/PEEK
– 20* C
220* C
max.0.5m/s
max.160bar
FPM 82
POM/PTFE/PEEK
– 45* C
130* C
max.0.5m/s
max.160bar
EPDM 85
POM/PTFE/PEEK
– 60* C
200* C
max.0.3m/s
max.120bar
MVQ 85
POM/PTFE/PEEK

SWS120

650x100 5 1
  • Primary Application
  • Application Limits
  • Not applicable
150x80 (12)
min.Temp max.Temp max. Speed max. Pressure Material
– 20* C
115° C
max.0.4m/s
max.400bar
HPU 94
NBR70,FPM75
– 20* C
115° C
max.0.4m/s
max.400bar
HPU 55 D
NBR70,FPM75
– 20* C
110° C
max.0.5m/s
max.400bar
SL-PU 94
NBR70,FPM75
– 50* C
110° C
max.0.4m/s
max.400bar
LT-PU 94
NBR70,FPM75
150x80 (13)
min.Temp max.Temp max. Speed max. Pressure Material
– 30* C
110° C
max.0.5m/s
max.160bar
NBR 85
NBR70,FPM75
– 20* C
150* C
max.0.5m/s
max.160bar
H-NBR 85
NBR70,FPM75
– 20* C
220* C
max.0.5m/s
max.160bar
FPM 82
NBR70,FPM75
– 45* C
130* C
max.0.5m/s
max.160bar
EPDM 85
NBR70,FPM75
– 60* C
200* C
max.0.4m/s
max.120bar
MVQ 85
NBR70,FPM75

SWS121

650x100 6 1
  • Primary Application
  • Application Limits
  • Not applicable
150x80
min.Temp max.Temp max. Speed max. Pressure Material / O-Ring
– 200* C
260*C
max.10m/s
max.400bar
PTFE pure
NBR70°/FPM75
– 200* C
260*C
max.10m/s
max.400bar
PTFE 1 glass
NBR70°/FPM75
– 200* C
260*C
max.10m/s
max.400bar
PTFE 2 bronze
NBR70°/FPM75
– 200* C
260*C
max.10m/s
max.400bar
PTFE carbone
NBR70°/FPM75
min.Temp max.Temp max. Speed max. Pressure Material/O-Ring
-200*C
-260*C
max.10m/s
max.400bar
PTFE D05 turq
NBR70/FPM75
-200*C
-260*C
max.10m/s
max.400bar
PTFE D05 glass
NBR70/FPM75
-200*C
-260*C
max.10m/s
max.400bar
PTFE graphite
NBR70/FPM75
-200*C
-260*C
max.10m/s
max.400bar
PTFE ekonol
NBR70/FPM75
-200*C
-260*C
max.10m/s
max.400bar
PTFE 25%glass
NBR70/FPM75

SWS124

650x100 7
  • Primary Application
  • Application Limits
  • Not applicable
150x80 14
min.Temp max.Temp max. Speed max. Pressure Material / O-Ring
– 200* C
260*C
max.10m/s
max.400bar
PTFE pure
– 200* C
260*C
max.10m/s
max.400bar
PTFE 1 glass
– 200* C
260*C
max.10m/s
max.400bar
PTFE 2 bronze
– 200* C
260*C
max.10m/s
max.400bar
PTFE carbone
min.Temp max.Temp max. Speed max. Pressure Material/O-Ring
-200*C
-260*C
max.10m/s
max.400bar
PTFE D05 turq
-200*C
-260*C
max.10m/s
max.400bar
PTFE D05 glass
-200*C
-260*C
max.10m/s
max.400bar
PTFE graphite
-200*C
-260*C
max.10m/s
max.400bar
PTFE ekonol
-200*C
-260*C
max.10m/s
max.400bar
PTFE 25%glass

SWS126-128

650x100 8
  • Primary Application
  • Application Limits
  • Not applicable
150x80 (15)
min.Temp max.Temp max. Speed max. Pressure Material
– 20* C
115° C
max.0.4m/s
max.400bar
HPU 94
NBR70,FPM75
– 20* C
115° C
max.0.4m/s
max.400bar
HPU 55 D
NBR70,FPM75
– 20* C
110° C
max.0.5m/s
max.400bar
SL-PU 94
NBR70,FPM75
– 50* C
110° C
max.0.4m/s
max.400bar
LT-PU 94
NBR70,FPM75
150x80 (16)
min.Temp max.Temp max. Speed max. Pressure Material
– 30* C
110° C
max.0.5m/s
max.160bar
NBR 85
NBR70,FPM75
– 20* C
150* C
max.0.5m/s
max.160bar
H-NBR 85
NBR70,FPM75
– 20* C
220* C
max.0.5m/s
max.160bar
FPM 82
NBR70,FPM75
– 45* C
130* C
max.0.5m/s
max.160bar
EPDM 85
NBR70,FPM75
– 60* C
200* C
max.0.4m/s
max.120bar
MVQ 85
NBR70,FPM75

SWS125

650x100 9
  • Primary Application
  • Application Limits
  • Not applicable
150x80 (17)
min.Temp max.Temp max. Speed max. Pressure Material
– 20* C
115° C
max.0.4m/s
max.160bar
HPU 94
– 20* C
115° C
max.0.4m/s
max.160bar
HPU 55 D
– 20* C
110° C
max.0.5m/s
max.160bar
SL-PU 94
– 50* C
110° C
max.0.4m/s
max.160bar
LT-PU 94
150x80 (18)
min.Temp max.Temp max. Speed max. Pressure Material
– 30* C
110° C
max.0,4m/s
max.160bar
NBR 85
– 20* C
150* C
max.0,4m/s
max.160bar
H-NBR 85
– 20* C
220* C
max.0,4m/s
max.160bar
FPM 82
– 45* C
130* C
max.0,4m/s
max.160bar
EPDM 85
– 60* C
200* C
max.0,4m/s
max.120bar
MVQ 85

SWS216

650x100 9 1
  • Primary Application
  • Application Limits
  • Not applicable
SWA101 (21)
min.Temp max.Temp max. Speed max. Pressure Material
– 20* C
115° C
max.0.4m/s
max.500bar
HPU 94
NBR70,FPM75
– 20* C
115° C
max.0.4m/s
max.500bar
HPU 55 D
NBR70,FPM75
– 20* C
110° C
max.0.5m/s
max.500bar
SL-PU 94
NBR70,FPM75
– 50* C
110° C
max.0.4m/s
max.500bar
LT-PU 94
NBR70,FPM75
min.Temp max.Temp max. Speed max. Pressure Material
– 30* C
110° C
max.0.5m/s
max.160bar
NBR 85
NBR70,FPM75
– 20* C
150* C
max.0.5m/s
max.160bar
H-NBR 85
NBR70,FPM75
– 20* C
220* C
max.0.5m/s
max.160bar
FPM 82
NBR70,FPM75
– 45* C
130* C
max.0.5m/s
max.160bar
EPDM 85
NBR70,FPM75
– 60* C
200* C
max.0.3m/s
max.120bar
MVQ 85
NBR70,FPM75

SWS129

650x100 10
  • Primary Application
  • Application Limits
  • Not applicable
150x80 (19)
min.Temp max.Temp max. Speed max. Pressure Material
– 20* C
115° C
max.000m/s
max.000bar
HPU 94
– 20* C
115° C
max.000m/s
max.000bar
HPU 55 D
– 20* C
110° C
max.000m/s
max.000bar
SL-PU 94
– 50* C
110° C
max.000m/s
max.000bar
LT-PU 94
150x80 (20)
min.Temp max.Temp max. Speed max. Pressure Material
– 30* C
110° C
max.000m/s
max.000bar
NBR 85
– 20* C
150* C
max.000m/s
max.000bar
H-NBR 85
– 20* C
220* C
max.000m/s
max.000bar
FPM 82
– 45* C
130* C
max.000m/s
max.000bar
EPDM 85
– 60* C
200* C
max.000m/s
max.000bar
MVQ 85

SWS130

650x100 11
  • Primary Application
  • Application Limits
  • Not applicable
150x80 (21)
min.Temp max.Temp max. Speed max. Pressure Material
– 20* C
115° C
max.0.4m/s
max.400bar
HPU 94
– 20* C
115° C
max.0.4m/s
max.400bar
HPU 55 D
– 20* C
110° C
max.0.5m/s
max.400bar
SL-PU 94
– 50* C
110° C
max.0.4m/s
max.400bar
LT-PU 94
150x80 (22)
min.Temp max.Temp max. Speed max. Pressure Material
– 30* C
110° C
max.0,4m/s
max.160bar
NBR 85
– 20* C
150* C
max.0,4m/s
max.160bar
H-NBR 85
– 20* C
220* C
max.0,4m/s
max.160bar
FPM 82
– 45* C
130* C
max.0,4m/s
max.160bar
EPDM 85
– 60* C
200* C
max.0,4m/s
max.120bar
MVQ 85

SWS131

650x100 12
  • Primary Application
  • Application Limits
  • Not applicable
600x400 13
min.Temp max.Temp max. Speed max. Pressure Material / O-Ring
– 200* C
260*C
max.10m/s
max.400bar
PTFE pure
NBR 85 deg
– 200* C
260*C
max.10m/s
max.400bar
PTFE 1 glass
H-NBR 85 deg
– 200* C
260*C
max.10m/s
max.400bar
PTFE 2 bronze
FPM 82 deg
– 200* C
260*C
max.10m/s
max.400bar
PTFE carbone
EPDM 185 deg
min.Temp max.Temp max. Speed max. Pressure Material/O-Ring
-200*C
-260*C
max.10m/s
max.400bar
PTFE D05 turq
-200*C
-260*C
max.10m/s
max.400bar
PTFE D05 glass
-200*C
-260*C
max.10m/s
max.400bar
PTFE graphite
-200*C
-260*C
max.10m/s
max.400bar
PTFE ekonol
-200*C
-260*C
max.10m/s
max.400bar
PTFE 25%glass

SWS138

650x100 14
  • Primary Application
  • Application Limits
  • Not applicable
150x80 (23)
min.Temp max.Temp max. Speed max. Pressure Material
– 20* C
115° C
max.0.4m/s
max.400bar
HPU 94
– 20* C
115° C
max.0.4m/s
max.400bar
HPU 55 D
– 20* C
110° C
max.0.5m/s
max.400bar
SL-PU 94
– 50* C
110° C
max.0.4m/s
max.400bar
LT-PU 94
150x80 (24)
min.Temp max.Temp max. Speed max. Pressure Material
– 30* C
110° C
max.0,4m/s
max.160bar
NBR 85
– 20* C
150* C
max.0,4m/s
max.160bar
H-NBR 85
– 20* C
220* C
max.0,4m/s
max.160bar
FPM 82
– 45* C
130* C
max.0,4m/s
max.160bar
EPDM 85
– 60* C
200* C
max.0,4m/s
max.120bar
MVQ 85

SWS139

650x100 15
  • Primary Application
  • Application Limits
  • Not applicable
150x80 (25)
min.Temp max.Temp max. Speed max. Pressure Material
– 20* C
115° C
max.0.4m/s
max.400bar
HPU 94
– 20* C
115° C
max.0.4m/s
max.400bar
HPU 55 D
– 20* C
110° C
max.0.5m/s
max.400bar
SL-PU 94
– 50* C
110° C
max.0.4m/s
max.400bar
LT-PU 94
150x80 (26)
min.Temp max.Temp max. Speed max. Pressure Material
– 30* C
110° C
max.0,4m/s
max.160bar
NBR 85
– 20* C
150* C
max.0,4m/s
max.160bar
H-NBR 85
– 20* C
220* C
max.0,4m/s
max.160bar
FPM 82
– 45* C
130* C
max.0,4m/s
max.160bar
EPDM 85
– 60* C
200* C
max.0,4m/s
max.120bar
MVQ 85

SWS141

650x100 1 2
  • Primary Application
  • Application Limits
  • Not applicable
600x400 13
min.Temp max.Temp max. Speed max. Pressure Material / O-Ring
– 200* C
260*C
max.10m/s
max.400bar
PTFE pure
NBR70°/FPM75
– 200* C
260*C
max.10m/s
max.400bar
PTFE 1 glass
NBR70°/FPM75
– 200* C
260*C
max.10m/s
max.400bar
PTFE 2 bronze
NBR70°/FPM75
– 200* C
260*C
max.10m/s
max.400bar
PTFE carbone
NBR70°/FPM75
min.Temp max.Temp max. Speed max. Pressure Material/O-Ring
-200*C
-260*C
max.10m/s
max.400bar
PTFE D05 turq
NBR70’/FPM75
-200*C
-260*C
max.10m/s
max.400bar
PTFE D05 glass
NBR70’/FPM75
-200*C
-260*C
max.10m/s
max.400bar
PTFE graphite
NBR70’/FPM75
-200*C
-260*C
max.10m/s
max.400bar
PTFE ekonol
NBR70’/FPM75
-200*C
-260*C
max.10m/s
max.400bar
PTFE 25%glass
NBR70’/FPM75

SWS142

650x100 16
  • Primary Application
  • Application Limits
  • Not applicable
600x400 13
min.Temp max.Temp max. Speed max. Pressure Material / O-Ring
– 200* C
260*C
max.10m/s
max.400bar
PTFE pure
NBR 85°
– 200* C
260*C
max.10m/s
max.400bar
PTFE 1 glass
H-NBR 85′
– 200* C
260*C
max.10m/s
max.400bar
PTFE 2 bronze
FPM 821
– 200* C
260*C
max.10m/s
max.400bar
PTFE carbone
EPDM 85
min.Temp max.Temp max. Speed max. Pressure Material/O-Ring
-200*C
-260*C
max.10m/s
max.400bar
PTFE D05 turq
-200*C
-260*C
max.10m/s
max.400bar
PTFE D05 glass
-200*C
-260*C
max.10m/s
max.400bar
PTFE graphite
-200*C
-260*C
max.10m/s
max.400bar
PTFE ekonol
-200*C
-260*C
max.10m/s
max.400bar
PTFE 25%glass

SWS238

Untitled design 10
  • Primary Application
  • Application Limits
  • Not applicable
150x80 (27)
min.Temp max.Temp max. Speed max. Pressure Material
– 20* C
115° C
max.0.4m/s
max.400bar
HPU 94
– 20* C
115° C
max.0.4m/s
max.400bar
HPU 55 D
– 20* C
110° C
max.0.5m/s
max.400bar
SL-PU 94
– 50* C
110° C
max.0.4m/s
max.400bar
LT-PU 94
min.Temp max.Temp max. Speed max. Pressure Material
– 30* C
110° C
max.0,4m/s
max.160bar
NBR 85
– 20* C
150* C
max.0,4m/s
max.160bar
H-NBR 85
– 20* C
220* C
max.0,4m/s
max.160bar
FPM 82
– 45* C
130* C
max.0,4m/s
max.160bar
EPDM 85
– 60* C
200* C
max.0,4m/s
max.120bar
MVQ 85

SWS199

650x100 2 2
  • Primary Application
  • Application Limits
  • Not applicable

Menu

Follow Us

Linkedin-in Instagram

Our Products

  • Rotary Seals
  • Piston Seals
  • Rod Seals
  • Wipers
  • O Ring
  • Guide Rings
  • Back - Up Rings

Location

Factory timings

  • Monday:- 9:30AM to 6:00PM
  • Tuesday:- 9:30AM to 6:00PM
  • Wednesday:- 9:30AM to 6:00PM
  • Thursday:- 9:30AM to 6:00PM
  • Friday:- 9:30AM to 6:00PM
  • Saturday:- 9:30AM to 6:00PM
  • Sunday:- Closed

© 2025 Seal Well Pvt Ltd | All Rights Reserved | Website Developed by EchoPx.com