Ecotel Black
- Ecotel Black typically refers to a cost-effective, eco-friendly elastomeric material made from recycled rubber compounds, often based on EPDM or NBR blends and filled with carbon black for improved durability and UV resistance. While mechanical and chemical properties can vary based on the formulation, it generally offers good wear resistance, decent elasticity, and adequate performance for non-critical applications. Ecotel Black is widely used in flooring, anti-vibration pads, gaskets, seals, and industrial liners where cost-efficiency, environmental benefits, and basic performance are priorities. It is especially suitable for general-purpose industrial and commercial use.
| Category | Property | Typical Value / Notes |
|---|---|---|
|
General |
Color |
Black
|
|
|
Hardness (Shore A)
|
60 – 80 (varies by formulation)
|
|
|
Density |
~1.3 – 1.6 g/cm³
|
|
|
Tensile Strength |
~5 – 10 MPa
|
|
|
Elongation at Break |
~150% – 300%
|
|
|
Recyclability
|
High (typically from post-industrial or post-consumer rubber)
|
|
Thermal |
Temp. Range |
-30°C to +100°C (approximate)
|
|
Chemical Resistance
|
Water, Mild Acids
|
Good
|
|
|
Oils, Fuels |
Limited to moderate (varies)
|
|
|
UV / Ozone Resistance |
Moderate (depends on base polymer)
|
|
Applications
|
Common Uses
|
Flooring, mats, gaskets, seals, sound dampening pads, industrial cushioning
|